Phones answered 24/7Newark, OH
Call (833) 490-5225
Phones answered 24/7Call any time(833) 490-5225
Urgent? Phones answered 24/7

Commercial water damage restoration in Newark and Licking County

Water removal, cleaning and drying in shops, offices, warehouses and other commercial buildings, sequenced around keeping the business running.

  • Phones answered 24/7
  • Licking River and storm water
  • Estimate approved before work
  • Moisture readings logged

Get a fast quote

Fastest: call (833) 490-5225. Or send this and we call you back.

Commercial Work

Commercial Water Damage Restoration: what it covers

Quick answer

Commercial water damage work is the same physics as a house with a different set of constraints: trading hours, stock, tenants, records and systems. Newark Water Damage Restoration works across Newark and Licking County with phones answered 24/7 and a crew sent as fast as one is available, and the work is zoned so part of the building can keep operating.

Commercial Water Damage Restoration illustration for Newark, OH, with the river and grain silos in the background

In a house, water damage is a disruption. In a commercial building it is also a loss of trading, and every decision about sequence has to account for that. The drying is the straightforward part; the harder questions are which areas get worked first, what can stay open, how stock and records are protected and what happens to the systems the business depends on.

The buildings vary more than housing does. A storefront on a city street, an office suite in a converted building, a warehouse on a slab near the interstate and a multi-tenant unit with shared services all behave differently when they get wet. What they share is that the shell is usually simpler than a house while the contents and systems are far more complicated.

Location sets the exposure. Newark sits where the North Fork, South Fork and main Licking River meet, and the USGS reports most Licking County flood damage along those streams and Raccoon Creek. The corridor along US 40 and I-70 near Hebron, where fields stayed under water into April 3 after the April 2, 2024 rain, carries a good deal of commercial and storage building on flat ground.

Service area
Newark & Licking County
Availability
Phones answered 24/7, emergencies first
Warning signs

Signs you need commercial water damage restoration

Keep staff and the public out of any wet area until it has been made safe, and treat an unmarked wet floor in a public space as a liability as well as a hazard. Do not re-energize distribution boards, motors or equipment that have been wet without the relevant trade clearing them. Racking that has taken water, or whose stock has shifted, should be treated as unstable and approached only after it has been assessed. Do not run fuel-powered pumps or generators inside a building. Where the water came from a drain, treat it as contaminated and keep it out of food preparation and service areas entirely.

  • Water across a sales floor, warehouse slab or office carpet
  • Ceiling tiles sagging, stained or dropping out of a suspended grid
  • Carpet tiles lifting or curling at the seams in an office
  • Stock, cartons and pallets wicking a dark line up from a wet floor
  • A smell of damp in a tenant space that has no visible water
  • Condensation or corrosion on racking, tooling and metal fixtures
  • Water in a below-grade mechanical room, pit or service duct
  • Staff reporting a wet patch that appears and disappears with the weather
Options

Types and options for commercial water damage restoration

A retail or hospitality space that has to reopen

Here the trading loss usually outweighs the repair, so the sequence is built around getting the public areas usable. Work is pushed into closed hours where it can be, containment hides and separates the areas being dried, and the removal line is set as tightly as the readings allow. Back-of-house areas are often dried while the front stays open.

An office suite with carpet, partitions and cabling

Offices hold a lot of absorbent material in the form of carpet, carpet tile, partition bases and stored paper, plus a great deal of cabling and equipment at floor level. The drying is straightforward and the logistics are not: workstations have to be moved, records protected, and the sequence agreed so staff can work somewhere while the rest is dried.

A warehouse or industrial building on a slab

Large floor area, little absorbent structure, and most of the exposure in stock and equipment. The slab holds moisture and gives it up slowly, so readings in concrete decide the end point. Racking has to be cleared where the floor must be cleaned, and the humidity in the building is brought down early to limit corrosion on metalwork and tooling.

A multi-tenant building with shared services

Water from one unit reaches others through floor assemblies, service risers and shared walls, and the job then involves several occupiers and a landlord at once. Mapping who is affected, documenting each space separately and agreeing access are as much of the work as the drying. Clear written reporting matters more here than anywhere else.

Still stuck? We pick up 24/7.

If it's an emergency, call now. For non-urgent commercial water damage restoration, send the form and we'll call you back.

Can a business stay open while the building is dried?

Often partly, and that is usually the aim. Containment lets one zone be dried while another trades, and work can be scheduled into closed hours. What cannot be worked around is a wet electrical system, an area that must be cleared to be cleaned, or contaminated water in a space the public uses.

The honest version of this conversation happens at the start. Some arrangements cost more in equipment and labor but keep the doors open, and that trade is yours to make rather than ours. What a crew should give you is a clear statement of the options and what each one means for how long the drying takes.

Where contaminated water is involved the constraints are tighter, because absorbent material has to come out and surfaces have to be cleaned before any drying, and public areas have to be genuinely finished rather than merely dry. That sequence is set out on our sewer backup page.

What happens to stock, records and equipment?

Contents are usually the largest part of a commercial loss, so they are dealt with early: moved out of the wet area, sorted, and documented. Paper records and anything on a bottom shelf are the first priority, metalwork is dried promptly because corrosion follows humidity, and documents can often go to specialist recovery.

Cardboard is the classic problem, because it wicks water a long way up a stack and collapses under the weight above it. Getting cartons off a wet slab is often the single most valuable hour of the whole job, and it is also what clears the floor so the cleaning and drying can proceed.

Equipment with motors, windings, bearings or electronics that were submerged belongs with the relevant trade rather than with a drying crew, and the honest answer on restarting any of it is not until that trade has cleared it. Bringing the humidity down early buys time for those decisions to be made properly.

  • Lift cartons and paper off the floor before anything else
  • Set documents and records aside for specialist recovery, not for the bin
  • Dry metal racking, tooling and fixings early to limit corrosion
  • Leave submerged motors, panels and electronics for the relevant trade
  • Record what was affected, by area, as it is moved

What drives the scope of a commercial job?

Floor area and volume, how much of the building is finished, the contents involved, how much has to be zoned and contained to keep trading, how long the water was present, and whether masonry or slab is holding it. The scope is measured, written, explained and approved before work begins.

Volume is the factor people underestimate. Dehumidification is sized to the cubic volume of the space being dried, and a warehouse has a great deal more air in it than a house of the same footprint. That is also why zoning and containment can reduce the work rather than add to it, by shrinking the volume being treated.

Keeping the building open is the other factor, and it cuts both ways. Working around trading hours and public areas takes longer and needs more containment, but a shorter closure is often worth more than the saving. The decision should be made explicitly, with the options and their consequences set out in writing.

How does commercial insurance treat water losses?

It depends on the policy, and commercial wordings deserve as careful a reading as domestic ones. The Ohio Supreme Court held by a five to two majority that sewage fell under a water exclusion in a commercial policy, in a case concerning an Akron nightclub, which illustrates how much turns on the wording rather than on the cause.

For a business the practical point is to establish before a loss what the policy covers, whether backup through drains and sewers is included, and how business interruption is handled. Those are questions for a broker, and they are far cheaper to ask in advance than to discover during a closure.

The documentation a crew produces is the same whatever the answer: dated photographs by area before anything is moved, depth and extent recorded, an itemized account of what was removed and why, and the moisture log through to the end. No restoration company can promise a claim outcome, and a clear record is worth more than any assurance.

Our process

How our commercial water damage restoration visit works

  1. Agree what has to keep running

    Before any equipment is placed, the crew establishes with you which areas must stay operational, where customers and staff need to go, what the trading hours are and which systems cannot be interrupted. That conversation shapes the whole sequence and is worth ten minutes at the start of the job.

  2. Make the building safe and remove the water

    Electrical distribution, below-grade plant and any submerged equipment are dealt with before anyone works in the wet area. Extraction then runs on the areas agreed as priority, with the discharge routed away from the building. Depth, extent and timings are recorded as the work proceeds.

  3. Get stock, records and equipment up and out

    In most commercial losses the contents are the larger part of the value. Cartons, paper, soft goods and anything on a bottom shelf are moved and sorted early, documents are set aside for specialist handling rather than discarded, and metalwork is dried promptly because corrosion starts in a humid building within days.

  4. Zone the building and contain the work

    Containment divides the wet area from the trading area, so drying can run in one zone while another stays open. That also keeps dust, noise and humidity where the work is. Routes, doors and any customer-facing area are agreed rather than assumed, and signage and protection go in where the public passes.

  5. Dry to readings and report as you go

    Dehumidification and directed airflow are sized to the volume, with cavity and assembly drying where water is behind a finish or under a floor. Readings at marked points are logged each visit and reported to you, your insurer and any landlord or tenant who needs them, and equipment stays until every material holds at target.

Licking County

Why commercial water damage restoration is different in Central Ohio

The commercial exposure in this county follows the streams and the highways. Newark, a county seat of about 50,000 people, sits at the confluence of the North Fork, South Fork and main Licking River, and the Licking River moved into low parts of the south side in April 2024. Along US 40 and I-70 near Hebron, laid out in 1827 in the canal era, the flats carry storage, retail and farm buildings, and fields there stayed under water into April 3 after that rain.

The city's sewer system is a commercial risk as much as a residential one. Newark runs about 238 miles of sanitary and combined sewers with 24 lift stations, with many pipes more than ninety years old, and the Ohio EPA has required storm and sanitary separation on the 16 North project. For a business in an older part of town, a heavy rain is a potential drain backup as well as a potential flood.

Planning for this is on the public record. Licking County adopted a countywide all-natural hazard mitigation plan in 2021 with Newark among the participants, and the USGS has produced flood-inundation maps for the four streams that carry most of the county's flood damage. For a business choosing or fitting out premises, those documents are a better guide to exposure than the memory of the last wet year.

Related

Flood Water Extraction and Pumping

Getting standing water out of a building safely and in the right order, which is the step every other part of the work waits on.

Sewer Backup Cleanup

Removal, cleaning and drying after waste water comes back into a building through a floor drain, toilet or laundry line.

Storm and Roof Leak Water Damage

The inside half of a roof leak: wet insulation, ceilings, walls and floors traced, removed where saturated and dried.

FAQ

Commercial Water Damage Restoration FAQs

How quickly can a crew get to a commercial building?

Phones are answered 24/7 and a crew is dispatched as fast as one is available, which is the honest form of that answer: no arrival time is promised, because in a widespread rain several properties call at once and crews reach them as they free up. What helps most is calling early rather than waiting to assess it yourself, and having someone on site who can authorize access and point out where the systems and the shutoffs are.

Can the work be done overnight or outside trading hours?

Much of it can, and for a retail or hospitality space that is often the right call. Extraction, removal and setting equipment are all schedulable; the drying itself has to run continuously, because switching equipment off at opening time is what makes a drying plan fail. Containment is what allows equipment to keep running in a zone while the rest of the building trades.

Who reports to the landlord or the other tenants?

That is agreed at the start, and it matters in a multi-tenant building where water from one unit has reached others. Each affected space can be documented separately, with its own photographs, extent and moisture log, so each occupier and the landlord have a record of their own area. Setting out who receives what, and who authorizes work in which space, avoids most of the disputes that otherwise follow a shared-building loss.

What happens to a wet suspended ceiling?

Tiles that have been wet are generally removed rather than dried: they sag, stain and lose their structure, and they are cheap relative to the labor of trying to save them. Taking them out also opens the void above, which is usually where the water is and where the services run. The grid itself is normally cleaned and kept, and the void is dried and read like any other cavity.

How long does a warehouse slab take to dry?

Longer than people expect, because concrete releases moisture slowly and a slab over saturated ground keeps returning it. The surface being dry to the touch means very little. Readings in the slab are taken at marked points and the equipment stays until they hold at target, and where a new floor finish is going down, that reading is what justifies laying it. Putting a finish over a slab that is still giving up moisture is how a second failure happens.

Do you handle the rebuilding as well?

The restoration work is the water: removal, contents, cleaning where it was contaminated, and drying to readings with a documented log. Rebuilding finishes, flooring, ceilings and fit-out is quoted separately once the structure is confirmed dry, so nothing is closed up over wet material. General contractor and local permit rules may apply to commercial rebuilding work, so the right place to confirm what your project needs is the local building department.

WhatsApp