Stay out until the power to the building is confirmed off, then photograph everything before touching it. Open the house to move air, get standing water pumped out, and leave soaked carpet, pad and lower drywall for a technician to read. The order protects you first and the record second.
Key takeaways
- Electricity and gas come before anything else; nothing in the house is worth entering water for.
- Photographs taken before the first bucket moves are the only version of the scene that cannot be recreated.
- River water is handled as contaminated, so porous materials it soaked usually leave the building.
- Drying cannot start while water is standing, so pumping is the step that unlocks everything after it.
- Mechanical systems that sat in water are checked by the relevant trade, not switched back on hopefully.
- The high-water line on a wall is the single most useful mark you can preserve for a technician and an adjuster.
What is the very first thing to do when the water drops?
Settle the electricity. If the panel or a meter sat in water, or you cannot reach the panel without standing in water, treat the building as live and stay outside until someone qualified has looked at it. The same caution applies to gas appliances.
Flood water finds outlets, extension cords, furnace controls and water heater connections at exactly the height they are installed. A cellar that looks like nothing more than a shallow puddle can still be energized. There is no household test for this and no reason to improvise one; the decision belongs to someone with the training and the instrument for it.
Gas deserves the same pause. A burner, a control valve or a flue that was underwater is not something to relight because the heat is off and the house is cold. Have the appliance looked at first. In the meantime, open windows if the weather allows, since moving air does more for a wet house than anything you can plug in.
Why photograph before cleaning anything?
Because the scene is evidence and it has a short life. Once the carpet is out and the cellar is swept, nobody can show how high the water stood or what it reached. Ten minutes of pictures now replaces an argument later.
Work room by room from the dry side. Catch the high-water line against something fixed, such as a door frame or a stair riser, so the height can be read later. Photograph the undersides and backs of furniture, the inside of base cabinets, the face of the furnace and the water heater, and anything you intend to discard, before it reaches the curb.
Make notes as you go: the date, the rough time the water arrived, how deep it got, and when it began to drop. In April 2024 the river rose into Newark neighborhoods after more than four inches of rain in under 48 hours, and in events like that the timeline blurs fast. Written-down detail is worth more than a confident recollection.
What should you not pull out yourself?
Soaked carpet and pad, the lower band of drywall, insulation in a wall cavity, and anything heavy enough to need two people. Leave those for a technician who will read them with a meter first and record what is removed.
Pulling finishes early feels productive and often costs you. Material taken out before it is documented is material an adjuster never sees, and a wall opened at the wrong height can mean a wider repair than was needed. Reading first and cutting second is the sequence that keeps the repair small.
There is a safety side too. River water carries silt and whatever the ground held, and is handled as contaminated from the start. That means gloves, boots and eye protection at a minimum, and it means a household vacuum is the wrong tool for any of it. Clear what you can carry dry, and leave the wet structure alone.
What can you usefully do in the first hours?
Move what is light and portable up and out, open the building to air if the weather helps, keep children and pets away from the wet area, and get the pumping started. Small acts that reduce contact and reduce standing time are the useful ones.
Lift what you can carry: books, boxes, electronics, paperwork, anything on a low shelf. Set it somewhere dry with space around it rather than stacking it in another room, because a wet box in a dry room just moves the problem. Photographs and documents are worth separating out early; they tolerate the least delay of anything in a house.
Then get the water out. Drying equipment does nothing useful in a room that still has water on the floor, so extraction is the step everything else waits behind. Phones here are answered around the clock and a crew is sent as soon as one is free; no arrival time is promised, but the queue starts when you call.
How does Newark's river setting change the picture?
The city sits where the North Fork, the South Fork and the main Licking River meet, and the USGS has reported that most county flood damage falls along those streams and Raccoon Creek. A flood here is often several waterways behaving badly at once.
The record shows what that can look like. January 1959 was the worst Ohio flood since 1913: the Newark water plant was underwater and a large manufacturing plant in the city took eight feet of water. The North Fork gauge at Newark holds its record crest of 23.90 feet from January 21, 1959, with later highs of 20.30 feet in January 2005 and 19.00 feet in January 2004.
More recently, the April 2024 rain pushed the river into the Little Texas neighborhood and the Canterbury Trails mobile home community on the south side, with police urging residents to leave, while fields along the South Fork near Hebron and Interstate 70 were still under water the following day. Raccoon Creek flooded low parts of Alexandria the same day.
What about the furnace, water heater and well?
Anything mechanical that sat in water gets checked by the trade that handles it before it is used. That covers the furnace, the water heater, the electrical panel, the sump pump and, where a property is on a well, the well itself.
Water in a burner assembly or a control board does not announce itself when the unit is switched on. Have it looked at. A drying crew will note which systems were in the water and at what height, and that note is what the heating contractor or the electrician needs when they arrive. It is also a line an adjuster will ask about.
If the property draws from a well or has its own septic arrangement, treat both as questions for the county health authorities rather than for a restoration crew. Licking County and the state agencies publish guidance for private systems after flooding, and that is the right place to take it.
How long does the wet structure stay a problem?
Until the readings say otherwise. Clean water can degrade toward a worse category within roughly a day or two, and flood water starts in the worst one, so time pressure is real even after the visible water has gone.
The materials that hold water longest are the ones you cannot see: wall cavities, the underside of a subfloor, insulation, the gap behind a built-in cabinet. A cellar floor can look dry while the block wall behind the framing is still wet. That is what meter readings at each visit are for, and it is why drying is not finished when the room stops looking wet.
Expect the equipment to run day and night and expect the house to be loud and warm while it does. That is the trade for drying the structure in place rather than tearing more of it out. Our drying timeline guide sets out what moves the schedule and what ends it.
What should you have ready when the crew arrives?
The rough timeline, which rooms took water and how deep, whether the power to the area is off, where the shutoffs are, and your photographs. Mention pets, tenants, a shared building or anything stored in the wet area.
The first questions are always about the source and the timing, because together they decide the water category and how much can be saved. If you know the water came across the yard rather than out of a pipe, say so immediately; it changes the gear the technician brings in from the truck.
Access matters more than people expect. A clear route to the lowest point of the wet area, a place to run hose, and somewhere outside for equipment all shorten the first visit considerably. If the driveway or the street is still wet, say that too, and keep the description honest rather than optimistic.
Frequently asked questions
Can I use a wet vacuum from the hardware store on river water?
It is the wrong tool for this water. Flood water is handled as contaminated, so it needs equipment and disposal that a household machine is not built for, and the volume in a flooded cellar is far beyond what a small tank will take. Keep yourself out of the water and let a crew pump it. Use your effort on carrying dry belongings upstairs instead.
Is it safe to stay in the house while it dries?
Often, if the water was limited to a cellar or a utility space, the power has been cleared, and you can live in the dry rooms. Equipment running day and night is loud and warm but it is not a reason to leave. Where river water crossed living space, the affected area is closed off while it is cleaned, and that usually means staying elsewhere for part of the work.
The water has gone down. Can I just let it dry on its own?
Not in an Ohio spring, and not with materials that hold water inside a cavity. Open windows help at the margin, but a wet subfloor and a wet wall base need air moved across them and the moisture pulled out of the air, measured until the readings drop. Left alone, the structure stays wet long enough for problems that cost far more than the drying would have.
What do I do about silt and mud?
Clear what you can from hard surfaces with protective gloves and boots once the standing water is gone, and do not let it dry into a fine dust before it is removed. Leave silt in carpet, pad and wall cavities alone, since those materials are coming out anyway. Photograph the worst of it before cleaning, including along the baseboards where the line shows.
How soon should I call?
As soon as you are somewhere safe to make the call, whatever the hour. Earlier calls mean shorter standing time, and shorter standing time usually means less material leaves the house. Phones are answered 24/7 and a crew is sent as soon as one is free. Call (833) 490-5225 and have the rooms, the depth and the timing ready.
Should I report the flood to anyone besides my insurer?
Tell your insurer first and keep a note of the call. Beyond that, the city and the county have an interest in where water went: Licking County maintains countywide hazard mitigation planning in which Newark participates, and the USGS publishes flood-inundation mapping for the four main streams. Reporting what you saw helps that record stay accurate.
Sources
This guide is general information for Licking County homeowners, not a substitute for an on-site inspection. Prices are estimates. See our disclaimer.